The round bale hay experiment – Part 5

The round hay bale experiment worked wonderfully and if you’ve followed us over the last 4 parts (links below), you know we recommend feeding round hay bales using the horse version of a round bale feeder. Part 5 might be the last but we need to cover this one additional thing. We have four horses and although a single round bale feeder normally works great with four horses, we experienced two issues that made us want to try adding a second.
First, Valentine, our big Tennessee Walking Horse, is low man on the totem pole, despite towering over the other horses. Because he isn’t at all aggressive in defending this low position, the other horses, including our relatively small Appaloosa Romeo, bully him. There are times where they will simply not let him eat. He has a very high metabolism anyway and it’s hard to keep him fed. He always shows a little ribby, despite the amount of feed we make sure he gets. I can’t be standing by the feeder to ensure the other horses let him eat so we needed a way for him to have access to hay when the herd was being mean.
Second, with four horses, a single round bale lasts between 4 days and a week, depending on the amount of fresh grass available. Having a second round bale feeder would potentially double the amount of time needed before we’d have to pull the tractor out for a re-supply. This is much appreciated here in Tennessee because we get a lot of rain. It’s now less likely we’ll have to put out hay during rain.
Our biggest concern with having two feeders was that the horses would just eat more. In the six months, it’s been since we bought it, this hasn’t been the case. The second feeder has doubled the time it takes before new bales are needed. We placed the feeders apart by a couple of hundred feet, in view of each other but despite this, Valentine still normally prefers to hang out with the herd, even though they bully him. I’m not sure why that is but he has easy access to food. We keep an eye on him to make sure his weight doesn’t drop and he seems content. With a second feeder, our horses enjoy having some options. After all, horses don’t like to stay in one place for too long so this way they can migrate between the two feeders, which probably feels a little more natural to them.
Although I was also initially concerned with hay mold, our horses seem to be eating the hay fast enough and mixing it up enough that mold isn’t growing on the bales after rain. We keep an eye on this too. As you know, mold is bad for horses.
If you have one or two horses, a single round bale hay would be sufficient but if you have a small herd of horses like us and you have some domination issues that keep one of your horses from getting food freely, you might considering have more than one round hay bale feeder.
The entire round bale hay experiment series:
The round bale hay experiment – Part 1
The round bale hay experiment – Part 2
The round bale hay experiment – Part 3
The round bale hay experiment – Part 4
The round bale hay experiment – Part 5 (you are here)
One of the first things we wanted to or needed to do with our new tractor is to move hay and it’s one of the reasons we used to justify having a tractor. Our round bale experiment was successful and now we feed mostly round hay bales to our horses throughout winter. Until now we’ve been pulling our car hauler full of round bales into our muddy pasture and then pushing a round bale off as needed. Now that we have a four wheel drive tractor, it was time to put it to work. But we needed one more thing: a hay spear. Unfortunately our tractor doesn’t have a quick-disconnect bucket. We could buy a hay spear implement for the arms but it would be a pain to unbolt and remove the bucket each time we needed a bale. While we do plan to convert our arms to use a quick-connect system, it’s a bit of a hassle up front. We’d need to buy a system and then have someone weld a bracket to our bucket. For now, we’ve opted to use a spear that connects to our bucket. We found a nice used setup on Craigslist that attaches in a way that spreads the load across a good portion of the bucket to minimize bending and yesterday we got to test it out. I’ll need some practice but it went well (see pic). At 800 or so pounds, having a bale up high like that makes the tractor a little unsteady. I left the bush hog on the rear for counterweight and lowered the bale when I cleared my trailer.
Been a little while since we talked about this but I have an update. Since we last wrote about our round bale experiment in 
Gone. That’s how I’d explain the round bale I mentioned in 


